Gecko 15-720-1820 Aqua-Flo Pump Wet End Assy, 2.0HP, 91041820-000

SpaGuts Replacement pump wet end assembly for the Aqua-Flo XP2 and Xp2e Flow-Master brand, by Gecko, side discharge 48-frame pump model, rated 3.0 BHP or 2.0 HP Continuous. OEM part number 91041820-000. Both intake and discharge fittings are 2.0 inch. The 2.0 inch pump wet end assembly has an outside to outside thread measurement of approximately 3.1 inch. Note 1: Only purchase this pump wet end assembly as a direct replacement to avoid leaks, fitment and failures. DO NOT install on a 56-Frame motor. Note 2: Make sure the original pump wet end is removable prior to purchasing. Otherwise the complete replacement pump 15-720-0500 is recommended. This is the replacement pump wet end assembly for the following Aqua-Flo XP2 Flow-Master pump part numbers: 15-720-0500, 1-05-0328A, wave master 71699 or wave master 7000 or wave master 36675 (1.65HP - single speed, 220V Configuration ONLY), 06120000-1040, XP2632022, 1-00-0144A, 1-00-0144, 06620390-2, 06120007-2, 06620876-1 Baja Spas, 06120453-2, 06620321-2, 06120812-1 Jacuzzi, 06620768-2, 06620786-2, 06620399-2 Diamante Spas, 06620342-2 Sonoma Spas, 06620003-2, 06620489-2, 06620390-2, 06620345-1 , 06620768-2, 06120681, 06620608-1, 06120070-1 , 06120, 06620, T55CXBRF, 06620764-1, 06620489-2, 06120500-2, 06120000-1040, 06620776-2, 06620339-1 Emerald Spas, 06620509-2, 06620768-2 Thermos Spas, 06620390-2, 06620168-1, 06620776-1, 06620000-1, 06120181-1, 06620500-2, 06120500-2040, 06620031-1, 06620485-2, 06620454-2, 06620831-1, 06620514-2, 06620001-2, 06620608-1, 06620342-2, 06620776-2, 06120608, 06620459-2, 06620788-2, 06620311-2, 0974001, 05620489-2, 34-402-1206, 310-1141SF, 91041610, 91041931-000, 5121-65 This item comes with a 90-Day limited warranty.

• Replacement pump wet end assembly for the Aqua-Flo XP2 and Xp2e Flow-Master brand
• Available in 2.0 HP
• OEM part number 91041820-000
• Both intake and discharge fittings are 2.0 inch
• 90-Day limited warranty